Shaker Screen Archives - Page 2 of 4 - Shale Shaker Screen,Shaker Screens for Sale,Shale Shaker Screen Manufacturers

2017年9月4日2017年11月2日

High Quality Shale Shaker Screen for Sale

The Shale Shaker Screen is a mesh screen that is created out of woven metal that goes inside the shale shaker. Whenever solids or cuttings are produced from drilling equipment, they are coated in drilling liquid. When those cuttings are shaken over shale shaker screens, the screen is able to capture all of the solid particles and allow any excess mud to drip through the screen where it can then be deposited back into the tank.

Shale shaker screen is fine mesh (single, dual or triple layered) used for filtering and separating drilling cuttings from mud (drilling fluid). It is of great importance to drilling efficiency, KOSUN is committed to designing the high quality screening to provide our clients the right screen for the perfect fit at competitive price.

High Quality Shale Shaker Screen for Sale-KOSUN

–Quality manufactured and API compliant shaker screens

-Right screen, Perfect fit, Competitive price.

-Exported to over 35 countries and regions.

-Free screen samples are available for testing purpose.

There are many different types of shale shaker screens available on the market today, each with different types of weaving to create the screen and different sizes of mesh. Ultimately choosing the best screen comes down to choosing the finest mesh you possibly can that doesn’t result in drilling liquid being lost from the front of the shaker screen that match the type of shaker equipment you are using.

If you are looking for replacement shale shaker screens for your drilling equipment, you may want to consider KOSUN. All of the shale shaker screens that we offer are high quality but extremely affordable. With a wide range of mesh designs and customizable screen options available, we can provide the perfect screen for your equipment at a price you can afford.

2017年8月29日

Shaker Screen with Many Types in the World

Shaker screen plays a very important role in the initial stage of the solid control system. If the shaker screen is correct, then you can be assured that the process is on the right track.

With the continuous development of innovation, the further development of technology, human found a new discovery, improved the previous existence. Likewise, the shale shaker screen has undergone modification, improvement and witnessing the new presentation. There are many types of shaker screens on the market.

Some types of shaker screen:

-Derrick shaker screen

There are two Derrick shaker screens

-Flat Screen (PWD)

This is the old Derrick shaker screen model. And pyramid shaking screen is cheaper.

-Pyramid shaker

This is an improved version of the flat screen. Has a higher drilling fluid handling capacity than the flat screen more effective.

-Hookstrip Soft Shaker screen

This is the early use of the vibrating screen. Has been surpassed by the newer models.

Hookstrip flat screen

The Hookstrip flat screen has a vibrating screen for easy sorting, screening and screening. It is usually used by the driller. Layer 2 to 3 layers of hooks and layered screens used in plastic enhancements enhance screen saver.

-Steel frame

This screen is commonly used in the industry. It is made of 2 to 3 layers of stainless steel, tightly tied to the frame, to make it strong. Rubber stoppers can be used to repair gaps or breaks.

This makes the screen cost-effective.

-Composite screen

The composite screen is an improved version of the steel frame. The vibrating screen is lighter and more durable and can withstand high temperatures.

As a professional, knowing the tasks involved in drilling work will inform you to choose a screen.Shaker screen of Kosun manufacturer with more than 20 years experience and gained well recognized owning to its high quality and best customer service. (Editor:Kosun Lily.Wang)

2017年7月13日2017年7月13日

How to Properly Use Shale Shaker Screen？

Shaker Screen

Shaker Screen consists of a frame that can either be of steel or plastic, into which mesh can be fitted. This mesh does the work of separating the mixture of solid and drilling fluid. A binding material is used to bind the mesh with the frame.

For maximum efficiency, Shaker Screen must be used properly. Following points describe how to properly use it.
–   The cloth that is used for making the mesh must be of good quality. Also, if the layering of the mesh is increased, the efficiency of the screen will automatically increase and the fineness of the mesh will also increase.
–   Methods must be implemented to increase the life of the screen. For this the first method is to have a very strong screen so that the meshes are supported very firmly. The second method is to provide proper tensioning to the screen.
–   The screen must be protected from over tensioning or under tensioning.
–   When not in use, the screens must be properly removed from the machine, cleaned and stored properly. Extra care must be taken while storing the screen.
–   Also, when the screen in being installed, care must be taken that they are not mishandled. Mishandling of the screen, especially during installation may cause extra wear and tear.
–   The weight of the mixture that is being fed to the screen must be in accordance to the amount of weight that the screen can handle. Different types of screens are available for various sizes of the mixture.
–   The screens must be cleaned frequently and carefully. Care that must be taken during cleaning the screen is, the water that is being used is not of very high pressure or else it may cause the mesh to unbind from the frame.

KOSUN will supply better goods and services to customers continually.

2017年7月10日2017年11月2日

Brandt Shaker Screen Replacement – Drilling Fluid Equipment

Brandt Shaker Screen

Brandt shaker screen is the key component in shale shaker equipment. They function as a sieve to block the solid drilling waste and let the precious drilling fluid to be carried to a separate channel for further treatment.

Shaker Screen is used in Shale Shakers as part of solid control system in drilling operations of various industries, such as oil and gas drilling, mining, coal cleaning, etc. They primarily serve the purpose of separating drilling cuttings from the drilling fluids.

Drilling fluid is a cocktail of number of chemicals that help in the drilling process. Drilling fluid is prepared in two variations – water based and oil based, and they are very costly to obtain. They serve as lubricant agent to keep the drilling waste management system efficiently functioning. They keep the drilling bit cool and clean to penetrate deeper into the borehole. And because of these reasons, operators invest in technologies to lower their overall operational cost and also for the environmental purpose. Shale Shaker are one such equipment to achieve that goal.

Shaker Screen has two integral parts – a screen Panel and a screen Mesh. A screen panel will hold the mesh in place, to efficiently serve its purpose. It is much like a larger frame that holds smaller sections of the mesh with help of intersections. The frame itself comes in different material and shape. One key differentiator among them is the area of mesh between these intersection, that could be utilized for the screening. These intersections are known as “blanking”. The lower the blanking better the shaker screen’s performance.

The screen mesh could be understood as a piece of cloth woven with the wires to form fine rectangular openings. The screen mesh comes into variety in terms of its durability and conductance. Then there is a binding agent that joins the screen panel with the screen mesh.
The most modern development in shaker screen field is introduction 3D screen technology.

2017年7月7日2017年11月2日

Brandt Shaker Screen Replacement from Kosun

Brandt Shaker Screen

Shale shaker is a very important equipment that is used in the first stage separation of drilling liquids and the solid materials obtained from drilling oil, gas or water wells. This shale shaker consists of a shaker screen that does the separation process.

Brandt Shaker Screen comes in various types and different mesh sizes. Its two main types are the hook type and pretension type. Also the amount and the size of the solid that will get separated depends upon the size of the mesh.

Because of its importance, it is very important that the shaker screen is cleaned regularly. Cleaning it regularly will increase its efficiency and will delay the wear and tear of the mesh.
Various methods of cleaning the screen are;
1) Self Cleaning:
– This methodology involves the use of small folded or creased wires.
– These wires are arranged on a surface in such a way that small gaps are created resulting in a mesh like structure. This is usually supported using Support bars so that they are free to vibrate. These vibrations prevent the blocking or jamming of the mesh.
2) Water based cleaning:
– In this method a high pressure water pipe is used that cleans the screen by pouring water on it at a very high speed. This is a very traditional method that cleans the screen when less cleaning is required.
3) Screen cleaning machines:
– These machines are fully enclosed machines. The screen is placed inside this machine where a powerful water gun, releasing water at a very high pressure, is used that cleans the screen.
– The advantage of this machine is that it is fully automatic and no effort is needed at the workers part.
– Also this machine reduces the time required for cleaning a screen there by increasing the overall cost effectiveness.

Welcome to contact us !

2017年5月18日2017年11月2日

Rock Shaker Screen of Kosun Properly Use

Rock Shaker Screen

Rock shaker screen is the most critical component of shale shaker, as it plays an important role in separating the solid from fluid.

As it goes with any project operations, many a times the disaster will take place because of very basic things were overlooked or not taken care of. So prevention is better than the cure.

Following this philosophy, let us outline for you a few tips that could make you shaker screen last longer than you imagined:

If the rock shaker screen let the large solid pieces pass through the screen, chances are that they will end up chocking the whole equipment and making your project operation to halt in no time. So make sure that you select the most optimum screen size.
Timely preventive supervision of any shaker screens will go a long way in preventing any lasting damage to the equipment itself. The moment any wear and tear is spotted in the screen, even any blockage, consider taking it off and either clean it thoroughly before replacing or go for a new one altogether if the screen is not in good condition or reusable.
Do not use sticks or brushes while cleaning the rock shaker screen, also make sure that you don’t end up using extra high pressure water guns to clear the screen holes, as it might be harmful for finer meshes.
Mishandling may also cause damage to shaker screen during Storage. As storage of shaker screens is often times the most overlooked aspect. The screens storage in a way that prevents them from friction or jerks that might cause them to be torn away.
The overall functioning of the equipment is also an important aspect, make sure that the deck rubbers are properly installed and not worn out. Also look at the condition of shaker basket.
Always go for API conformed shale shaker screens only as to ensure the quality of your screen.

2017年5月18日2017年6月26日

Shaker Screen—API Standardizes Criteria for Solids Separation

Shaker Screens

Shaker Screens are the wear part of shale shaker, mainly classified into soft sieve screen, sieve plate type screen,and frame plate type screen.

The American Petroleum Institute is a trade association in the oil and natural gas industry in US. API works in collaboration with number of stake holders in the industry for the betterment of the industry.

It also conducts research and help in standardizing the industrial practices. One such guideline related to drilling industry was the standardization of criteria for solids separation. It mainly attributes to the size of shaker screens across the industry that determines the quality of fluid.

The purpose of this standardization was to simplify the screen selection process and provide the users with the screens that will make the solid separation process more efficient.
The API first came up with a Recommended Practice of drilling fluid processing system evaluation (RP 13C & E). Which was also approved by ISO 13501. This RP 13 C broadly covers the tests that describe the openings on the screen of a shale shaker screen in comparison of known standards. It should be considered that this test only describes the openings in the shaker screen but doesn’t talk about its performance.

Conformity to API standards by a manufacturer by providing the information on the labels will help the users determine their choice in best manner. A buyer will use his discretion as to which screen to use to get best conductance or increased life and so on and so forth.

Based on the standardized labeling of shale shaker screens the buyers are likely to make a more informed decision as to what is likely to work for their needs without leaving it guess-work.
Now as it happens with any change process, not all companies might embrace the system and continue to resist, while others do label the screens with the new standards. It is the end users prerogative to ask the manufacturer to provide the test related data for the screen that they intend to purchase.

2017年5月18日2017年6月26日

How to Install Shaker Screen for Shale Shaker?

Shaker Screen

Shale screen and Shale shaker are critical in the drilling process. Despite this, the shaker screens are delicate and prone to damage by drilling solids which occasionally break them. Having equipment that meets the industry standards and maintaining it well is inescapable.

What use is there in having a good equipment that you cannot install? Due to the crucial role they play in the solid control process, understanding how to install the shaker screen is critical.

Perhaps when you first purchased, the screen was already installed in the equipment. However, because the screen is fragile and gets damaged in the course of working, it requires occasional replacement and re-installation. The steps outlined below have been incorporated with general observances that equipment users are familiar with. They will guide you about how to install a shaker screen.
i.   As soon as it is damaged shut down the equipment, close the feeder and provide tag.
ii.   Use your hands or appropriate tools to uninstall the screen.
iii.   Clean the screens in the drilling mud using water.
iv.   Transfer drilling solids from the shale shaker by using the centrifugal sand pump and the shear pump to cut the drilling solids into smaller sizes to ease transportation.
v.   Extract the screen from the equipment.
vi.   Put the screen carefully on the table. Tighten the screen carefully using screws. For multiple-layered screens go, through the process again for each of the layers of screen.
vii.   Bolt the screen on the side with the locating bar with the cuttings outfall on the outside and plug it into the generator trailer.

Your shaker screen is now installed and you are ready to resume work. Remember that much as it is imperative for the user to know how to install the screen, choosing the screen that meets industry standards is as paramount.

2017年5月18日2017年11月2日

Shaker Screens for Sale of Rectangular Heavy Duty (RHD)

Shaker Screens

Shaker screens come in variety of sizes and shapes based upon shale shaker’s make and model. A Rectangular Heavy Duty Shaker Screen is mainly used for handling heavy solid drilling cuttings taken out during oil field drilling projects.

Drilling as such is widely used not only in oil and gas industry but in mining and coal cleaning industries also. Wherever the project demands handling heavy duty drilling waste management system , rectangular heavy duty shaker screens are deployed for use.

The main purpose of using shale shaker equipment is to separate out the drilling fluid from drilling solids i.e. drilling cuttings.
A Rectangular Heavy Duty Shaker screen uses two layers of finely knitted mesh material and one layer of a coarse mesh to enable the handling of the heavy duty solid waste to provide it better durability and better conductance. There had been number of incidents where during the solid control system process, while shale shaker was deployed to separate drilling cuttings from drilling fluid, some thicker parts of solid would get stuck in the circulation and make their way through multiple layers of mesh of the shaker screen and over time burst the shaker screen’s mesh cloth. To prevent such incidents, rectangular heavy duty shaker screens came into existence.

RHD shaker screens follow proprietary multi layered technology, that enhances the overall permissibility of drilling fluid through the screen with much less resistance, which naturally enhances the performance of shale shaker equipment.

The shaker screens in RHD line are available in different variations, based on the particulate size they allow to permit through and these are standardized by the America Petroleum Institute through their labeling practice. API has labeled different shaker screens based on the holes size distribution measured with the help of light.
As the technology advances, the drilling industry is all set to go through much more modernized with start to finish automation.

2017年5月18日2023年4月12日

Shaker Screens Replacement of Kosun Manufacturer

Shaker Screens is a critical component in solids control equipment used in the drilling industry. Drilling operations use a borehole technology to penetrate deep beneath the surface to reach the fossil fuel, in this pursuit, the mud-loggers first need to do a sampling to ascertain the depth and quality of the rock they are penetrating.

In oil field digging, let’s suppose in an off-shore site, this drilling will be done with the help of a drilling rig. As the drilling bit will cut through the rock underneath the ocean floor, it will need some lubricant to keep it going, a drilling fluid is used for that purpose.

A drilling fluid is a rich mixture of different chemicals, either oil-based or water-based, this is commonly known as “drilling mud”. This drilling mud is very expensive to create, and it doesn’t only keep the equipment lubricated but also helps in keeping it cool and clean for further operations.

The drilling bit will carry with itself drilling cuttings, essentially the rock shavings, mixed with drilling mud. The mud-loggers will extract these shavings from the drilling bit for further analysis.

As explained earlier in the article, the drilling fluid is quite expensive so it is imperative for the operators to restore the drilling fluid from the drilling waste. For this purpose, various solid control types of equipment are used, among them a shale shaker is the foremost.

A shale shaker with the help of shaker screens helps separate the drilling cuttings from drilling fluid, and the separated drilling fluid is channeled to a separate container for further processing and treatment. The dried solid, i.e. drilling cuttings are conveyed to a separate container for further treatment and disposal.

One very important factor in the solid control system is its contribution to environmental balance. If a solid control system is not efficient enough, it is likely that the drill cuttings will still carry some amount of drilling fluid that contains chemicals that could be really harmful to the environment and cause contamination of soil or groundwater. The drilling industry follows strict rules on drilling waste management for the sake of environmental impact.

In conclusion, a shale shaker’s main function is to filter the drilling waste with the help of effective shaker screens and as a result help in the economy of overall drilling operations and environmental prevention.