KOSUN MD series efficient mud cleaner is the second and third level solid control equipment in the drilling fluid purification system.

KOSUN MD series efficient mud cleaner is the second and third level solid control equipment in the drilling fluid purification system, which can further separate the smaller solid particles contained in the mud processed by the vibrating screen, so that the mud can enter the four-level separation equipment. The cleaner can be used independently, or its bottom flow vibrating screen can be used as a parallel standby device of the first level solid control vibrating screen.

MD series high efficiency mud cleaner features:

1. Desander, desilter, shale shaker three in one, compact structure design;

2. Polyurethane cyclone, delay service life;

3. Detachable cyclone support, which is convenient for customers to convert into spreading and drying machine or desander and desilter;

4. Electric screen box Angle adjustment, convenient and reliable, and mechanical Angle adjustment for standby;

5. Screen box seal patent design, good sealing effect, long service life, and easy to replace;

6. The bottom frame of the screen box is made of stainless steel, which greatly improves the corrosion resistance and service life;

7. The overall heat treatment of the sieve box can work for a long time under high excitation intensity;

8. Plate frame mesh and wedge type screen pressing device facilitate rapid replacement of screen;

9. Adopt international brand vibration motor.

Notes for use of KOSUN horizontal screw centrifuge.

1. Horizontal screw centrifuge shall not be used for separating inflammable, toxic, corrosive or radioactive substances.

2. Read the instructions carefully before preparing to install or operate the horizontal screw centrifuge.

3. Do not operate centrifuges with damaged or unmarked warning labels.

4. If the vibration amplitude of the machine exceeds the limit specified in the data list of installation, operation and maintenance of this manual, the centrifuge shall not be used.

5. When the feeding temperature exceeds the limit specified in the data list of installation, operation and maintenance of this manual, the centrifuge shall not be used.

6. Do not start the centrifuge when there is ice water, freezing or hard material in the drum.

7. Do not operate the centrifuge in excess of the maximum speed of the drum and the maximum density of the solids specified in the manual data list or on the nameplate of the centrifuge.

8. Do not operate the centrifuge without belt cover and other protective facilities.

9. Regularly check all automatic cut-off devices and monitoring systems to ensure their normal operation.

10. Do not disassemble thehorizontal screw centrifuge if it cannot be determined whether the centrifuge is completely stopped, whether the main power supply is completely disconnected, and whether the main switch is disconnected and locked safely.

11. Do not operate the centrifuge when cracks, dents, pores or grooves appear in the drum, motor or supporting frame of the centrifuge.

12. Do not operate the centrifuge when the motor is running in the direction opposite to the indicated arrow.

13. Do not start the machine until the centrifuge has been completely installed.

14. Follow all lubrication procedures and steps of the equipment.

15. Inspect centrifuge and motor bases and all supporting racks, housings and fittings at least once a year on a regular basis.

16. Do not place rags or loose clothing near rotating parts.

17. When disassembling, installing or operating and maintaining the machine, strictly follow the normal procedures.

18. Only specially trained technical personnel can operate, clean, dismantle and install the horizontal screw centrifuge.

Technical features of KOSUN drilling waste management.

Drilling waste management, mainly with the constant improvement of the environmental protection requirement, puts forward higher requirements on drilling field cutting processing, the emergence of drilling waste purification system, not only can very good to solve the environmental problems, at the same time to the waste of the solid control system to produce secondary recycling, can maximize the retention of mud is useful at the same time, to focus again after processing of drilling cuttings curing processing, reduce the field work for the destruction of the environment. Its main equipment includes: vibrating screen, cuttings dryer, drilling fluid centrifuge, screw conveyor, screw pump and other equipment.

Technical features of KOSUN drilling waste management:

1. Adopt advanced slurry-drying technology, which can effectively recover useful liquid phase in drilling cuttings and achieve high efficiency curing treatment;

2. Low moisture content of useless solid phase after treatment, convenient for transportation;

3. Drilling cuttings drying for oil-based and composite base mud is very effective;

4. Further dewatering and screening the solid particles separated from the first-grade mud treatment to improve the overall treatment effect;

5. Adopt a unique grouting process when dealing with the solid phase of high-flow mud to improve the treatment efficiency;

6. Modular design, convenient and fast moving and transportation;

7. Concealed cable design, well site specification;

8. Simple and practical processing process, small variety of processing equipment, large processing capacity;

9. The whole set of equipment is simple to operate, with less labor and low cost of use and maintenance.