Specifications for electric motors in mud agitator

The motors in the mud agitator all use explosion-proof T-frame, 3-phase 230~460V, 1150 rpm, frequency 60 Hz; or 3-phase 190~380V, 958 rpm, frequency 50 Hz. Flexible coupling for motor The joint is directly connected with the reducer. A strong steel passport is mounted above the connecting shaft.

The solid mild steel shaft is connected to the reducer with a rigid coupling. In order to adjust the height of the impeller, a keyway is opened in the lower part of the shaft. The diameter of the shaft ranges from 38.1 mm to 88.9 mm, depending on the model, and the actual length of the shaft is determined by the user.

How to calculate the size and number of mud agitators

In the equipment currently in use, it is very likely that 75% of the mud agitators are installed improperly. The reason for this situation is either not understanding the correct size determination method, or not understanding the importance of selecting the size reasonably. The reasonable stirring amount calculated by each agitator is related to the given power and impeller diameter. The relationship between the mixing range that the impeller can reach and the specific gravity of the mud and the required power can be determined by calculation.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

Drilling fluid purification system – mud agitator

The mud agitator is a continuous and reliable solid control system for drilling fluid to maintain uniformity and suspension of solid particles. It is mainly used for stirring and mixing of drilling fluid to prevent solid particles of drilling fluid from deposition in the tank circulation system, so that the circulating drilling fluid has stable performance and even mixing. Mud agitator is one of the indispensable equipment in drilling fluid purification system.

mud agitator
mud agitator

KOSUN MA series mud agitator belongs to the equipment of solid control system of drilling fluid tank. It is mainly composed of explosion-proof motor, reducer, frame and wave wheel assembly. The motor is connected with the reducer, and the reducer is connected with the wave wheel shaft through a rigid coupling. The wave wheel is welded by four blades.

KOSUN mud agitator product structure optimization, small floor space, compact structure, smooth operation, low noise, long service life, less vulnerable parts, high cost performance characteristics. High pressure airless spraying equipment is used for construction. After primer, medium paint, finish paint and other procedures to achieve a beautiful appearance and anti-corrosion effect. The agitator shaft and agitator impeller are processed by grinding pickling, helping plating, hot dipping zinc, passivation and fine grinding, which greatly improves the service life and anti-corrosion effect.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

An essential tool for drilling mud treatment – mud agitator

As the supporting equipment for tank-type solids control system of drilling fluid, KOSUN MA Series Mud Agitator is mainly used to mix and stir the drilling fluid by impeller to maintain suspension of solid particles in drilling fluid, prevent solids from settling in the tank-type circulating system and keep the circulating drilling fluid stable in performance and uniformly mixed.

KOSUN MA Series Mud Agitator mainly consists of explosion-proof motor, reducer, base and impeller assembly, the connections between the motor and reducer, as well as between the reducer and impeller shaft, are all by rigid couplings, and four blades are welded into an impeller.

MA Series Mud Agitator, developed and manufactured by KOSUN, has such advantages as simple and compact structure, high mixing efficiency, etc. This series of agitators cover complete specifications, the impellers fall into detachable and undetachable types, and both single-layer and double-layer impellers are available for your choice. The impellers can be designed according to the actual requirements of customers.